Tork Wiping Paper Plus

  • Tork Wiping Paper Plus
  • Tork Wiping Paper Plus
  • Tork Wiping Paper Plus
  • Tork Wiping Paper Plus

Article: 131135

Colour: White

EAN: 7310791200903

Quality level: Advanced

Format: Combi Roll

The 1-ply multi-purpose Tork Wiping Paper Plus is ideal for light wiping tasks and hand wiping. This paper can be used in either the Tork Floor or Wall Stand dispensers, which are developed for safety, efficiency and reliability or the Tork Maxi Centre-feed Dispenser, which is designed for smoother single-hand dispensing.

  • This high-capacity roll lasts longer and saves time on refilling
  • Particularly good for cleaning glass – does not leave any traces on the surface.
Read more Read less

Product certificates

EU Ecolabel SE/004/001
EU Ecolabel SE/004/001
Food contact approved 42872 U 16
Food contact approved 42872 U 16


Product data

SystemW1 - Wipers wall/floor/standard system
W2 - Wipers combi roll system
Roll Length460 m
Roll Width24.5 cm
Roll Diameter25 cm
Number of Sheets1150
Sheet Length40 cm
Core Inner Diameter7.1 cm
Ply1
PrintNo
EmbossingNo
ColourWhite

Shipping data

Consumer unit

EAN7310791200897
Pieces1
Height245 mm
Width250 mm
Length250 mm
Volume15.3 dm3
Net weight2930 g
Gross weight2970 g
Packing materialnone

Transport unit

EAN7310791200903
Pieces2
Consumer units2
Height245 mm
Width250 mm
Length500 mm
Volume30.6 dm3
Net weight5.9 kg
Gross weight6 kg
Packing materialShrink

Pallet

EAN7322540720556
Pieces60
Consumer units60
Transport unit30
Height1386 mm
Width1000 mm
Length1200 mm
Volume0.9 m3
Net weight175.81 kg
Gross weight179.97 kg

Environmental info

Content

The product is made from

Virgin pulp

Recycled fibres

Chemicals

The packaging material is made from paper or plastic.

Material

Virgin fibres and recovered paper

In the tissue process both virgin fibres and recovered paper are being used. The choice of pulp is made based on product requirements and pulp availability so the pulp is used in the most efficient way.

The environmental benefits and economic feasibility of recovered paper as a raw material source depend on its availability, transport distance and the quality of the collected material.

Recycling of paper is an efficient use of resources as the wood fibres are used more than once.

High demands are put on quality and purity of recovered fibres, considering each step of the chain (collection, sorting, transportation, storage, use), to ensure safe and hygienic products.

Recovered paper can be produced both from collected newsprint, magazines and office waste. The paper is dissolved in water, washed and treated with chemicals under high temperature and screened to separate out impurities.

Virgin pulp fibres are produced out of softwood or hardwood. The wood is subject to chemical and/or mechanical processes wehre the cellulose fibres are separated out and lignin and other residuals are removed.

Bleaching is a cleaning process of the fibres and the aim is to achieve a bright pulp, but also to get a certain purity of the fibre in order to achieve the demands for hygiene products and in some cases to meet the requirements for food safety.

There are different methods used today for bleaching: ECF (elementary chlorine free, where chlorine dioxide is used, and TCF (totally chlorine free) where ozone, oxygen and hydrogen peroxide is used.

Bleaching of the recovered pulp is made with chlorine-free bleaching agents (hydrogene peroxide and sodium dithionite).

Chemicals

All chemicals (process aids as well as additives) are assessed from an environmental, occupational health and safety and product safety point of view.

To control product performance we use additives:

  • Wet strength agents (for Wipers and Hand Towels)
  • Dry strength agents (is used together with mechanical treatment of the pulp to make strong products like wipers)
  • For coloured papers dyes and fixatives (to secure perfect fastness of the colour) are added
  • For printed products printing inks (pigments with carriers and fixatives) are applied
  • For multi ply products we often use a water soluble glue to secure the integrity of the product

In most of our mills we do not add optical brighteners but it often occurs in recovered paper since it is used in printing paper.

We do not use softeners for professional hygiene products.

High product quality is secured through quality and hygiene management systems throughout production, storage and transport.

In order to maintain a stable process and product quality the paper manufacturing process is supported by the following chemicals/ process aids:

  • defoamers (surfactants and dispersing agents)
  • pH-control (sodium hydroxide and sulphuric acid)
  • retention aids (chemicals that help to agglomerate small fibres to prevent fibre loss)
  • Coating chemicals (that help to control the creping of the paper to make it soft and absorbent)

To reuse broke and to utilise recovered fibres we use:

  • Pulping aid (chemicals that help to repulp wet strong paper)
  • Flocculation chemicals (that help to clean out printing inks and fillers from recovered paper)
  • Bleaching agents (to increase the brightness of pulp from recovered paper)

In the cleaning of our waste water we use flocculation agents and nutritients for the biological treatment to secure that no negative impact on water quality comes from our mills.

Food Contact

This product fulfills the legislative requirements for Food Contact materials, confirmed by external certification performed by a third party.  The product is safe for wiping food contact surfaces and may also come occasionally into contact with foodstuffs for a short period of time.

Environmental labels

This product is approved for the EU Ecolabel.

Packaging

Fulfilment of Packaging and Packaging Waste Directive (94/62/EC): Yes

Article creation date and latest article revision

Date of issue: 2013-05-29

Revision date: 2017-11-01

Production

This product is produced at LILLA EDET mill, SE and certified according to ISO 14001 (Environmental management systems), and ISO 9001.

Destruction

This product is used both for personal hygiene and for industrial processes. When used in industrial processes the product might through use be contaminated with different substances. This will determine how the used product will be handled / disposed of /destructed. The product itself is suitable for incineration. If used in industrial processes contact local authorities before destruction. When used for personal hygiene it can be collected together with household waste.

SCA Hygiene Products AB, 405 03 GÖTEBORG, Sweden

Choose a dispenser

Image
Products
Article number
Colour

Tork Maxi Centrefeed Dispenser

Article number 653000

Tork Maxi Centrefeed Dispenser

Article number 653008

Tork Floor Stand

Article number 652000

Tork Floor Stand

Article number 652008

Tork Wall Stand

Article number 652100

Tork Wall Stand

Article number 652108

Tork Accessory Bin Liner Holder

Article number 206550

Alternative products

  • Tork Heavy-Duty Wiping Paper

    473382

  • Tork Wiping Paper Plus

    130041

  • Tork Wiping Paper Plus

    130052

  • Tork Industrial Heavy-Duty Wiping Paper

    130081

Others who looked at Wipers and Cloths products also looked at

Product ill pack disp M2 Elevation square.jpg

Centrefeed

Versatile centrefeed rolls for multi-purpose wiping and hand drying
TORK_Restaurant_napkins.jpg

Napkins and tableware

Table top products that set the scene and create atmosphere
TORK_Kitchen_ skin-care.jpg

Skincare

High-quality products to leave hands feeling clean and skin refreshed and healthy
TORK_Washroom_sanitizers.jpg

Sanitiser

Sanitisers for hygienic hands in office, food service, and healthcare environments